Quality Service Quality Products
Hire or Sale, Service & Manufacture

Non Mechanical Menu

About Us
Ex-rental Plant & Equipment

Mechanical Menu

Contact Hiremasters Ex Rental Plant & Equipment

Sub Categories for Roadworks
Roadcrossing Plates | Roadworking Signs | Temporary Roads | Roadworking Barriers | 

Roadcrossing Plates Top

Non-slip Road Crossing Plate

Flat steel plates with a non slip surface applied.
  • 1.2m x 1.2m x 13mm
  • 2.4m x 1.2m x 13mm
  • 2.4m x 1.2m x 19mm
  • 3.65m x 1.2m x 25mm
Other sizes available on request

Click here for the Road Crossing Plates - Code of practice

Steel Road Plate

Flat steel plates complete with lifting eyes in four corners. The plate size and thickness should allow for a safety margin if the plates are used for excavating covering purposes, compared with loading.
  • 1.22m x 1.22m x 13mm (4' x 4' x ?")
  • 1.22m x 1.22m x 19mm (4' x 4' x ?")
  • 1.22m x 1.22m x 25mm (4' x 4' x 1")
  • 1.83m x 1.22m x 13mm (6' x 4' x ?")
  • 1.83m x 1.22m x 19mm (6' x 4' x ?")
  • 1.83m x 1.22m x 25mm (6' x 4' x 1")
  • 2.44m x 1.22m x 13mm (8' x 4' x ?")
  • 2.44m x 1.22m x 19mm (8' x 4' x ?")
  • 2.44m x 1.22m x 25mm (8' x 4' x 1")
  • 3.65m x 1.22m x 25mm (12' x 4' x 1")
Laying and lifting services are available, all crossing plates should be installed with plate lifting clamps.

Click here for the Road Crossing Plates - Code of practice

Non-slip Plastic Utility Plate

This type of plate is used mostly on footpaths for domestic/pedestrian traffic and can be fixed down to uneven surfaces.
  • 1080mm x 1080mm
  • maximum load 400kg
  • maximum square opening 800mm x 800mm

Plate Lifting Clamps

Used horizontally, in pairs, for handling and moving steel plate materials. A stable grip on the plate is given by a wide toe plate and twin jaw design
  • 4 tonne S.W.L.

Kerb Ramp System

The system is designed to conform with the Safety at Streetworks Code of Practise. This allows the strong yet lightweight safety cover to be used as part of the kerb ramp system in addition to its traditional and versatile use in cabling and maintenance projects.
  • Safety cover
  • Kerb ramp riser block

Lightweight Plastic Road Plates

The versatile new safety cover utility, cabling and maintenance projects, which is strong yet lightweight.

Now you can enjoy an unprecedented level of versatility when covering trenches, manholes and excavations - allowing vehicular (cars and light vans to a gross weight of 2 tonnes) and pedestrian access to footways and frontages. Exceptionally rigid in construction, yet lightweight and easy to handle.
  • Plate size: Length: 1100mm, Width: 1000mm, Depth: 25mm, Weight: 16kg approx

Click here for the Road Crossing Plates - Code of practice

Roadworking Signs Top

Stacca Barriers

This is a new type of safety barrier and is very easy to handle and install and when not in use, stacks flat to save space.
  • Size 2m x 1m

Safety Hose Ramps

This type of ramp is ideal for protecting compressed air/water hoses where vehicular traffic is present.

Road Signs and Ancillary Equipment

We offer a comprehensive selection of road signs and ancillary equipment. All equipment complies with Chapter 8 requirements.
  • Traffic Blocks - 1mx300mmx300mm
  • Road Cone - 450mm (18")
  • Road Cone - 750mm (30")
  • Road Cone Big Foot - 1m (3'3")
  • No Waiting Cone - 450mm (18")
  • Road Signs - 750mm (30")
  • Road Signs - Motorway Type
  • Road Signs - Motorway Type c/w stand
  • Sup. Plate
  • Stop/Go Board c/w tripod
  • Road Pins

Speed Reduction Ramps

Used to reduce traffic speed.
  • Heavy duty recycled PVC segments with moulded bolt holes and cable channel
  • Black and yellow segments 50cm x 50cm for early visual warning
  • Height level: 7cm

Rubber Cable Protector

Specifically designed to resist the harsh environment conditions of outdoor use. Suitable for all types of industry, ranging from construction sites and road traffic signals.

Safewall Plastic Traffic Separators

This type of barrier is most suited for lane delineation at roadworks for the creation of temporary parking bays, they can also be used for crowd control. Red and white plastic planks can be installed to form a pedestrian barrier. The barrier is filled with water or sand to provide a stable, ballasted unit.
  • Unit size, 1000mm L x 600mm H x 500mm D


Self weighted, well coloured and easy to assemble, the Samlog can be used as a traffic/pedestrian barrier system in various situations. Weighing 40kg approx, it can be easily set up and dismantled in a matter of minutes without the need for extra couplings.
  • Totally maintenance free
  • Vandal Resistant
  • Ideal for pedestrian/traffic separation
  • 1000mm L x 300mm H x 300mm D

Safewall Plastic Combi Barrier

Ideal for use as vehicle or pedestrian separators. Reflective barrier board for extra visibility. Available in 4m increments.
  • Height 1030mm x Length 1000mm x Width 510mm

Temporary Roads Top

Ekki Timber Mats

These mats protect soft ground and are suitable for rubber tyred vehicles. These mats may be used to take evenly distributed weights of up to 20 tonnes for 3 metres and 35 tonnes for 5 metres (this is all dependent on the ground conditions).

Another benefit of these mats is that the Ekki mat will not float and is ideal for working in tidal conditions.
  • 5.0m L x 1.0m W x 150mm D heavy duty
  • 3.5m L x 1.0m W x 70mm D light duty


Used as a single track system for pedestrians or a twin track lightweight vehicle roadway. Boards are supplied as single units and butt together to form the required length and width. Please note for vehicle use you will need two porta-boards.
  • L1m x W1.4m x 40mm Vehicle use, per metre twin track
  • L1m x W1.4m x 40mm Pedestrian use, per metre single track

Baulk Timbers

These timbers are normally used as temporary kerbing or traffic separation. Comes in random lengths. Timber can be supplied painted red and white at additional cost.
  • 300mm x 300mm (per metre)
  • Red & white painting available


Sleepers are suitable for various uses within the construction industry or for landscaping projects etc.
  • Standard Railway Sleepers
  • Approx size 2500mm L x 225mm W x 150mm H
  • 70kg
Also available for sale.

Ground Protection Mats (Plastic Composite)

These type of mats are ideal for moving plant over finished landscaped areas and footpaths and come in the following sizes:
  • 3000mm x 1500mm x 20mm
  • 3000mm x 1000mm x 15mm
  • 3000mm x 750mm x 15mm

Man portable for ease of installation by a single person.

Pedestrian Ramp Crossing

Plastic Vehicle Crossing Plate

Light Duty


1200mm x 880mm

Temporary Zebra Crossing

Non Slip Road Crossing Plates

Site Map | About Us | Second Hand Plant | Contact | Home © 2019 Hiremasters